English
  • shafi_banner

Mutane kuma suna tambayar menene igiyar robar o-ring

Mutane kuma suna tambayar menene igiyar robar o-ring da aka Fitar da Hoton
  • Mutane kuma suna tambayar menene igiyar robar o-ring
  • Mutane kuma suna tambayar menene igiyar robar o-ring
  • Mutane kuma suna tambayar menene igiyar robar o-ring
  • Mutane kuma suna tambayar menene igiyar robar o-ring
  • Mutane kuma suna tambayar menene igiyar robar o-ring
  • Mutane kuma suna tambayar menene igiyar robar o-ring
  • Mutane kuma suna tambayar menene igiyar robar o-ring
  • Mutane kuma suna tambayar menene igiyar robar o-ring

Mutane kuma suna tambayar menene igiyar robar o-ring

Takaitaccen Bayani:

Bodi Seal ƙwararren ƙwararren masana'anta ne na kasar Sin & mai siyarwa kuma mai fitar da kayayyaki wanda ke da samfuran igiyar igiya na masarautu da metric roba o-ring.mun samar da nau'ikan abubuwan rufewa na al'ada.Ko kuna buƙatar spooled Rubber O-rings, O-ring igiyar a girma ko kuma fi son a raba shi da ɓarna cikin zoben na al'ada, za mu yi aiki tare da buƙatun aikin ku don ƙirƙirar inganci mai inganci.Igiyar zobeda kuke bukata.Ana amfani da igiyar O-Ring lokacin da daidaitattun girman O-ring ɗin bazai dace ba.Muna ba da al'adaO-ringigiyar don amfani a cikin famfuna, silinda, da bawuloli don hana iskar gas ko ruwa yawo ta abubuwan da aka haɗa.An ƙera shi da ƙayyadaddun ƙayyadaddun ku, igiyar O-ring ɗinmu tana samuwa cikin girman inch ko awo, ma'auni, quad(X), ko ƙirar murabba'i, da kayan elastomer iri-iri.

 

 


Cikakken Bayani

Tags samfurin

Igiyar O-Ring (kuma aka sani da igiyar o-ring ko igiya o-ring ko igiyar roba) hatimin igiyar roba ce tare da sashin giciye madauwari.Ana iya amfani da shi kai tsaye a kan ramin rufewa don hana ruwa ko iskar gas daga zubowa ko yanke tsayin da ake buƙata kuma a yi amfani da takamaiman manne don haɗa DIY ta ƙare biyu don samar da daidaitaccen o-ring da ake buƙata.Igiyar roba galibi ana yin ta ne, don haka lokacin aikinta gajere ne.Ana iya yanke shi zuwa tsayin mita 1 ko kuma a mirgina shi zuwa mita 50, mita 100 ko tsayi don ɗaukar kaya da sufuri.

Bisa ga sifar giciye, za a iya raba igiyar o-ring zuwa nau'i hudu, wato misali, murabba'i, rectangular, da quad.Ma'auni ɗaya shine mafi yawan amfani da igiya mafi tsada, kuma igiyar zoben quad tana da mafi kyawun aiki amma mai tsada sosai.

igiyoyin zobe

Daidaitaccen Igiyar O-Ring

Bayanan martaba/bangaren giciye madauwari ne (O-dimbin yawa) kuma ita ce igiyar igiya da aka fi amfani da ita tare da mafi ƙarancin farashi.

Square O-Ring Cord

Square O-Ring Cord

Bayanan martaba/bangaren giciye yana da murabba'i (▢-siffa) kuma yana iya maye gurbin madaidaicin igiya yayin samar da ingantaccen aikin hatimi.

Nau'u (Sashe)

Igiyar O-Ring Rectangular

Igiyar O-Ring Rectangular

Bayanan martaba/bangaren giciye yana da rectangular (mai siffa ▭) kuma ana amfani da shi a cikin waɗancan ramukan rufewa waɗanda ke da siffar rectangular.

igiyoyin zobe x

Igiyar zobe Quad (Igiyar zoben X)

Bayanan martaba/bangaren giciye quad ne (mai siffa X) kuma ana iya amfani dashi a cikin aikace-aikace masu tsayi da tsayi.Hakanan yana da tsawon rayuwar sabis.

  • Kayayyakin Igiyar O-Ring
Ana samun igiyar a cikin nau'ikan roba da kayan filastik kamar suNBR, HNBR, FKM, VITON, SILICONE, EPDM, CR, PTFE, PU,
BD SEALna iya kera abubuwa daban-daban na igiyar o-ring kuma muna da haja da yawa.
Tauri na yau da kullun shine 70ShoreA, amma kuma zamu iya yin shi a Shore A 30/40/50/60/75/80/90/95.

  • NBR/ Nitrile O-Ring Igiyar-mafi yawan farashi, ana amfani dashi don yawancin masana'antu da aikace-aikace.

  • Viton O-Ring Igiyar-mafi girman zafin jiki, ƙarfin juriya na sinadarai, kyakkyawan aiki, da farashi mafi girma.

  • Silicone O-Ring Igiyar-marasa ɗanɗano kuma mara guba, ana amfani dashi a masana'antar likitanci da abinci, musamman silicone na FDA.

  • EPDM O-Ring Igiyar-Kyakkyawan juriya ga tsufa, yanayi, da lalata sinadarai, musamman amfani da su a masana'antar mota.

  • Neoprene O-Ring Igiyar-mai kyau na roba, karkatar da tashin hankali, juriya ga abrasion da wuta, tare da kwanciyar hankali mai kyau na sinadarai.

  • Abubuwan da aka bayar na PTFE ORing Cord-nasa ne na kayan filastik, tare da tauri mai ƙarfi, da ingantaccen kwanciyar hankali, wanda aka saba amfani da shi azaman zoben ajiya.

  • PU (Polyurethane) ORing Igiyar-nasa ne na filastik abu, musamman dace da tsauri lodi.

 

  • Calculator Yanke Tsawon Igiyar O-Ring

Kuna iya ƙididdige tsayin yanke madaidaiciyar igiyar roba extrusion hannun jari tare da kalkuleta mai zuwa.Da fatan za a tabbatar da madaidaitan ƙimar diamita na ciki (ID) da ɓangaren giciye na bayanan martaba (CS) da farko sannan ku yi wasu ƙididdiga masu sauƙi.

 

Π

Misali:

Yin amfani da igiyar diamita na 10mm (CS), mai amfani yana son yin daidaitaccen o-ring wanda ke da diamita na 300-mm a ciki.

Lissafin da za a yanke tsawon igiyar don yin o-ring da ake bukata shine kamar haka:

300 (ID)+10 (CS)= 310

310×3.1415926= 973.89mm

Za a yanke igiyar zuwa tsawon 973.89 mm don yin o-ring da ake bukata.

 

  • Tsarin Girman Igiyar O-Ring & Haƙuri

Ana auna girman madaidaicin igiya ta hanyar diamita na bayanin martaba.Wannan ginshiƙi yana nuna duka girman daular da awo.Teburin kuma yana nuna haƙurin igiyar o-ring, ta yadda zaku iya lissafta daidai ko igiyar zata iya dacewa da ainihin aikace-aikacenku.Daga cikin waɗannan masu girma dabam, girman inci ya ɗan bambanta da girman o-ring AS568, yayin da girman awo ya dogara ne akan kasuwar china da wasu kasuwannin ketare.Ainihin, za mu iya kera duk waɗannan nau'ikan igiya a babban inganci, farashi mai gasa, da isarwa cikin sauri.Idan ba a jera wasu girman a cikin tebur ba, da fatan za a tuntube mu don tattauna igiyar da aka keɓance ku.Marufin igiyar roba na iya zama mai sauqi qwarai ko kuma an ɗaure shi cikin abin nadi.Da fatan za a yi oda bisa ga ainihin bukatunku.

Daga diamita 0.5mm zuwa diamita 300mm duk Ana iya kera su!

 igiyoyin roba 1

 

   Ma'auni O-Zobe Tsarin Girman Igiyar                            Tsarin Girman Igiyar O-Ring na Imperial
Metric CS (mm) Ainihin CS (inch) Haƙuri (mm) Sunan CS (inch) Ainihin CS (inch) Metric CS (mm) Haƙuri (inch)
2 0.079 ± 0.20 1/16" 0.07 1.78 ± 0.008
2.5 0.098 ± 0.25 3/32" 0.103 2.62 ± 0.010
3 0.118 ± 0.25 1/8" 0.139 3.53 ± 0.014
3.5 0.138 ± 0.35 3/16" 0.21 5.33 ± 0.016
4 0.157 ± 0.35 1/4" 0.275 6.99 ± 0.022
4.5 0.177 ± 0.40 5/16" 0.313 7.95 ± 0.022
5 0.197 ± 0.40 3/8" 0.375 9.53 ± 0.022
5.5 0.217 ± 0.40 13/32" 0.406 10.31 ± 0.022
6 0.236 ± 0.40 7/16" 0.437 11.1 ± 0.026
6.5 0.256 ± 0.55 15/32" 0.472 11.99 ± 0.026
7 0.276 ± 0.55 1/2" 0.5 12.7 ± 0.026
7.5 0.295 ± 0.55 9/16" 0.562 14.27 ± 0.026
8 0.315 ± 0.55 5/8" 0.625 15.88 ± 0.026
8.5 0.335 ± 0.55 3/4" 0.75 19.05 ± 0.033
9 0.354 ± 0.55 7/8" 0.875 22.23 ± 0.033
10 0.394 ± 0.55 1" 1 25.4 ± 0.039
11 0.433 ± 0.65 1-1/16" 1.062 26.97 ± 0.039
12 0.472 ± 0.65 1-1/8" 1.125 28.58 ± 0.039
13 0.512 ± 0.65 1-1/4" 1.25 31.75 ± 0.039
14 0.551 ± 0.65 1-1/2" 1.5 38.1 ± 0.039
15 0.591 ± 0.65
16 0.63 ± 0.65
17 0.669 ± 0.65
18 0.709 ± 0.85
19 0.748 ± 0.85
20 0.787 ± 0.85
21 0.827 ± 0.85
22 0.866 ± 0.85
23 0.906 ± 0.85
24 0.945 ± 0.85
25 0.984 ± 0.10
26 1.024 ± 0.10
27 1.063 ± 0.10
28 1.102 ± 0.10
29 1.142 ± 0.10
30 1.181 ± 0.10

  • Filin amfani da igiyoyin roba/O-Ring Cord

应用领域图片

A ƙarshe, mun gabatar muku da na'urar haɗin O-ring mai suna KO SPLICER, hoton kamar haka:

https://www.bodiseals.com/people-also-ask-what-is-the-o-ring-cord-rubber-strips-product/

 

Farashin: Bada matsakaicin rangwame dangane da inganci mai kyau a gaba

Biya: Sassauƙi da Sadarwa Shahararrun tallace-tallacen kiredit a halin yanzu

inganci:  Duk wani matsala mai inganci a cikin shekara 1 ana iya dawo da shi ko musanyawa

Bayarwa: Don ƙaramin tsari a cikin kwanaki 7, ana iya tattauna babban tsari

Hannun jari:AS568 duk masu girma dabam & Metric O-Ring Cord Daga diamita 1mm zuwa 100mm

Manufar Sabis: Fahimtar gaskiya mafi kyawun tallafi mutunta haɗin gwiwa kamar iyali

 

 

 

 

 









  • Na baya:
  • Na gaba:
    • Ku rubuta sakonku anan ku aiko mana

    Rukunin samfuran

    Danna shiga don bincika ko ESC don rufewa